Buy Dry-burning cabinet Microstop GP-15 Pro, dry-burning cabinet for manicure tools, sterilization of medical instruments, disinfection of instruments wholesale and retail in ubeauty.pro store

A beauty salon or a nail salon  is a place where a visitor can relax while the masters carry out any procedure. At the same time, the client trustingly hopes that the tools used by the master are sterile and clean. In order for           to really must in salon, there must be a dry heat oven, or, as it is also called, an air sterilizer.

This equipment is able to sterilize metal and glass instruments with hot, dry air without harm to them . In other words, such sterilization will in no way affect the sharpness, quality and condition of the instruments.

When choosing a dry heat, a problem may arise, they say: "Which dry heat to choose?". First of all, you should pay attention to the size of the dry heat and the volume of the sterilization chamber. If even dry-heaters with a small chamber volume are suitable for small salons, then for larger salons it is necessary to select models with a larger capacity. Among the products of the domestic manufacturer Microstop, there is one such model that is ideal not only for beauty salons, but even for Beauty-schools - dry-heat cabinet GP-15 Pro.

GP-15 Pro first of all stands out for the large volume of the sterilization chamber, because it can fit from 8 to 12 sets of instruments. Thus, in a beauty salon, even with a high daily traffic, customers will always have sterile instruments.

The speed of sterilization is guaranteed by a temperature regime of 200 ° C, at which the sterilization process lasts only 30 minutes . However, if there is time, then you can choose another mode of operation, for example, 160°C / 150 minutes, or 180°C / 60 minutes.

In addition to these three temperature modes, you can choose more one & nbsp; - the third mode of operation, which is called "drying". For drying, set the heating temperature to 80 ° C, after a while this process will take only half an hour.

The electronic dry heat system is reliable and safe, but if the temperature suddenly rises sharply to more than 200 ° C , an emergency shutdown will work and the dry heat will automatically turn off.

The dry oven GP-15 Pro, like the rest of Microstop products, has been tested for compliance with the standards and sterilization norms and was approved by the Ministry of Health Ukraine. The equipment is safe, therefore it can be used even in  medical centers and institutions.

The walls of the sterilization chamber and shelves, which are included in the package, are made of stainless, heat-resistant steel. Even over time, they will not rust and not deform from high temperatures.

Compared to smaller models of Microstop dry heats, this model has received large dimensions and weight, which, of course, affected its ergonomics. However, in  its sterilization chamber, you can mark a much larger number of sets of instruments: without exaggeration, 4-5 times more.

The average service life of a dry heat is 50,000 hours of continuous operation, which in translation is about 6  ;years of daily sterilization. In the end, it's more likely to replace for equipment upgrades, rather than for breakage or failure. Thus, the purchase of such a dry heat is a thoughtful, profitable decision not for a couple of years, but for long years of operation.