Carbide cutters for manicure and pedicure are made from hard alloys containing tungsten and other elements. Diamond grinding is used to form and sharpen the cutting edge. Such cutters for manicure are durable, productive, heat up much less during operation.
Carbide cutters can work in one direction - clockwise (ordinary) and in two (reverse).
unlike all other nozzles, carbide cut the material, forming chips, not dust. Most often, TVS burs are used to remove the upper keratinized layer of heels and corns. They are also ideal for thinning gel and acrylic when correcting or removing artificial nails.
SPECIFICATIONS
Shank diameter: 2.35 mm
Shape: cone
Color: red
Abrasivity: fine
Recommended speed: 15,000 - 20,000 rpm
PURPOSE
Treatment of the foot;
Treatment of calluses;
Treatment of corns
Treatment of fungal nails
Care for carbide cutters
Immediately after work, place the nozzle in a disinfectant solution, soak it in the solution for the required time. After that, the nozzle must be washed under running cold water.
After disinfection, place the carbide nozzle in an ultrasonic cleaner, all impurities will be removed from the cutter by cavitation.
After processing, the nozzles must be stored in a special lockable stand for cutters.
Disinfect, clean and sterilize the nozzles after each use and each client.
Color marking of the designation of the degree of processing of the TVS cutters
Yellow - super fine;
Red - fine;
Blue - medium;
Green - coarse;
Black - super coarse.
