Carbide cutters for manicure and pedicure are made from hard alloys containing tungsten and other elements. Diamond grinding is used to form and sharpen the cutting edge. Such cutters for manicure have high wear resistance.
Unlike all other nozzles, carbide cutters cut the material, forming chips, not dust. These ball-shaped carbide burs are designed for the treatment of calluses, removing corns, removing interdigital calluses, drilling holes in acrylic, gel and for design, removing fungal nails.
SPECIFICATIONS< /p>
- Cutter diameter: 2.3mm
- Shank length: 40mm
- Shank diameter: 2.35mm
- Shape: ball
- Colour: blue
- Abrasivity: medium
- Recommended speed: 15,000 - 30,000 rpm
PURPOSE
- Treatment of small but deep corns;
- Removal of corns on the fingers;
- Removal of keratinized edges of cracks;
- Treatment of deep cracks;
- Treatment of hyperkeratotic skin and nails.
Care for carbide cutters
- Immediately after work, place the nozzle in a disinfectant solution, soak it in the solution for the required time. After that, the nozzle must be rinsed under running cold water.
- After disinfection, place the carbide nozzle in an ultrasonic cleaner, all contamination will be removed from the cutter by cavitation.
- The nozzles after processing must be stored in special lockable stand for cutters.
- Disinfect, clean and sterilize the nozzles after each use and each client.
Color marking of designations for the degree of processing of TVS cutters
- Yellow - super fine;
- Red - fine;
- Blue - medium;
- Green - coarse;
- Black is super rough.
