ITALWAX film waxes are an improved version of hot wax. Due to the inclusion of special components, waxes have special properties and advantages.
They work at + 42°?, which excludes the possibility of burns.
Wax is applied with a spatula in a thin layer, regardless of the direction of hair growth.
The contours of the body are clearly repeated, because they differ in high plasticity, allowing you to depilate hard-to-reach areas the first time.
Due to long-term heat exposure (5-12 seconds), waxes steam the skin well, capture every hair, even short and stiff ones, and only then harden.
The wax is removed with a film, completely removing all the hairs with roots, leaving behind no broken hairs, irritated and reddened skin.
Economical in use, hair can be removed from the armpit with one application. Reduce spending by approximately 30%.
Rules for using ITALWAX film wax:
- Heat the wax in an electric heater to t + 42°C.
- Treat the depilation area with an alcohol-containing lotion.
- Apply a small amount of talcum powder.
- Apply a thin layer of wax with a spatula, regardless of the direction of hair growth, but in the direction of yourself, leaving a small "petal", which can then be grabbed (we try to depilate the armpit with one application).
ATTENTION! Do not rush, carefully press the spatula, applying the necessary effort.
- The wax will harden after 5-6 seconds (wax ready for removal should not stick to the hand when touched).
- Having previously stretched the skin in the direction opposite to the tear, remove the wax with a sharp movement in the direction away from you parallel to the skin. Repeat the procedure on the next section.
- After waxing, treat the skin with a soothing, cooling, oil-free product: cooling cream / gel, "White Orchid" emulsion lotion .
Main mistakes when using film wax:
Wax stretches like caramel and is difficult to remove .
Reason: wax did not harden.
Solution: dry the wax with talc, wait 2-3 seconds and remove.
After removing the wax, hairs remained.< /strong>
Reason: the spatula with wax was not pressed enough to the skin, so the hairs did not get into layer of wax.
Solution: apply wax to the area of skin with the remaining hairs, pressing the spatula tighter to the depilation zone.
After removal, the wax around the edges of the application remains on the skin.
Reason: uneven multiple wax application.
Solution: create an application with the same layer in the middle and on the edges.
