Buy Saeyang h37lsp handle wholesale and retail in ubeauty.pro store

With the beginning of the development of hardware manicure, many more or less well-known manufacturers began the production of control units and, accordingly, micromotor handles for working with them. Saeyang, which was founded in 1976 and was originally engaged in the production of dental equipment, was no exception.

Now Saeyang products are considered one of the best in the world, and therefore are one of the most popular. This is especially true for their manicure equipment, because their control units easily withstand the competition of other companies.

Today, the company provides a choice of more than 20 models of routers and more than 15 models of micromotor handles. It is worth noting that most of all pens have either a partially or completely metal body. And one of these pens is the fairly common H37LSP.

Although this pen has only a partially metal body, even this significantly affects the wear resistance of its components. Namely: during operation, heat exchange occurs between the heated bearings and the metal front of the housing, as a result of which heat is distributed between them. This significantly reduces the temperature load on the bearings and thereby prolongs their service life.

In addition, the front metal part of the housing has a diameter of no more than 16 mm, and this is the place where fingers are grasped with a pencil grip . Thus, the handle fits comfortably in the hand, which is the key to the accurate work of the master. This is facilitated to a large extent by the low weight of the device - only 218 g.

The micromotor of the handle also heats up during prolonged operation, so ventilation holes were provided in the case. Through them, air enters the housing, which cools the engine. Even such a small detail prevents such an important structural element from overheating.

In the H37LSP handle, the engine can accelerate the shaft up to 35,000 rpm, and the torque can reach 2.9 Ncm. With such technical characteristics, the handle can be used not only for manicure procedures, but also for pedicure procedures.

The simplified Twist-Lock collet allows you to change nozzles in no more than 5 seconds. To do this, you just need to turn the corresponding section of the handle to the left (collet opening), change the nozzle and turn that section back (collet closing).

Pay attention! Do not close the collet without installed in her nozzles. This can lead to breakage of the collet.

During operation, the micromotor handle produces a minimum amount of noise and vibration, so the master always feels comfortable working with it.

Thus, we conclude that the H37LSP pen is an ergonomic, high-quality device that will adequately prove itself in any nail service procedure.