Ultrasonic cleaner for manicure instruments Ultrasonic Cleaner CD-4800
Ultrasonic sterilizer used for cleaning:
- Various kinds of electronic components and circuit boards.< /span>
- Glasses and their parts.< /li>
- Jewellery, diamonds, watch chains, keys, etc. .
- Stationery: fountain pens, pens with brushes, etc.
- Medical supplies.
- Manicure Tools and Bits
The ultrasonic cleaner is a special device for sterilization of various tools: manicure tools, nozzles for a milling cutter and more. Ultrasound penetrates deep even into the most hard-to-reach contaminated places of instruments, cleaning them well. The ultrasonic cleaning bath combines 2 stages of instrument preparation: cleaning and pre-sterilization treatment. This will help reduce the processing time of instruments in the sterilizer, as well as make the cleaning procedure better, unlike manual cleaning.
< p>
The principle of the ultrasonic bath is to create the effect of cavitation - ultra-fast formation and destruction of millions of small bubbles in a liquid medium. This is due to the alternation of low and high pressure waves generated by ultrasound. The size of microscopic bubbles with increasing pressure grows several million times, as a result of which they burst, and the washing liquid acquires the necessary energy for deep cleaning of inventory from solid contaminants.The ultrasonic bath is made of high quality stainless steel to resist rust and wear. Thanks to the transparent lid, which prevents splashing of liquid, you can observe the cleaning process. Internal lighting will facilitate the inspection of the contents of the bath. Automatic timer, digital LED display.
? the set comes with two types of coasters for parts immersed in the bath.
Specifications of Ultrasonic Cleaner CD-4800 Ultrasonic
- Power: AC220 - 240V~ 50Hz
- Power: 70W
- LED Display
- Dimensions: 230x180x160 mm
- < span style='font-size: 18px,'>Container volume: 1400 ml
- Tank size: 168 x 136 x66 mm
- Ultrasonic frequency: 42 kHz
- Weight: 1.75 kg
- Manufacturer: Codyson
4800 ultrasonic cleaning features:
Tank material: stainless steel
Body material: impact-resistant plastic
Digital control: Yes
Timer: 5 digital modes
Timer settings: 90s - 180s - 280s - 380s - 480s
View: Sterilizers
Sterilizer Type: Ultrasonic
Timer : Yes
Product Country: China< /span>
Ultrasonic cleaning sequence , sterilization and disinfection of instruments:
- Place the item to be cleaned on the plastic tray,
< /span>- Pour water into the purifier bath. The water level must be between the MIN-MAX marks
- Place the tray in the tub. The objects to be cleaned must not come into contact with each other and with the walls of the steel bath.
- Press the ON button, the cleaner starts working.
- Typically mode is 180 sec. sometimes enough.
- Watch the degree of water pollution.
- If heavily soiled, replace the water and repeat the procedure in short mode.
If desired, pre-sterilization cleaning can be carried out using an ultrasonic cleaner. You can pour disinfectants inside the sink WITHOUT CHLORINE such like Surfanios, Aniozyme, Blanidas enzyme, Blanidas active, Lysoformin. At the same time, strictly follow the instructions of the disinfectant manufacturer!
