Ultrasonic cleaner for manicure and dental instruments Ultrasonic Cleaner CD-2800
< /span>Ultrasonic washer (bath) is designed for mechanical cleaning of instruments from various kinds of contamination before the sterilization procedure, in particular instruments that have holes, recesses or rotating joints ( scissors, tongs, nippers, etc.), nail files, nozzles for routers, burs, milling cutters, tattoo needles, but only metal products.
The Ultrasonic Cleaner CD-2800 ultrasonic sterilizer for manicure instruments is used for cleaning:
- Various kinds of electronic components and printed circuit boards.
- Glasses and their parts.
- Jewelry, diamonds, watch chains, keys, etc.
- Stationery: fountain pens, brush pens, etc.
- Medical supplies.
- Manicure Tools and Bits
An ultrasonic cleaner is a special device for sterilizing various instruments: tools for manicure, nozzles for a milling cutter and more. Ultrasound penetrates deep even into the most hard-to-reach contaminated places of instruments, cleaning them well. The ultrasonic cleaning bath combines 2 stages of instrument preparation: cleaning and pre-sterilization treatment. This will help reduce the processing time of instruments in the sterilizer, as well as make the cleaning procedure better, unlike manual cleaning.
< p>The principle of the ultrasonic bath is to create the effect of cavitation - ultra-fast formation and destruction of millions of small bubbles in a liquid medium. This is due to the alternation of low and high pressure waves generated by ultrasound. The size of microscopic bubbles with increasing pressure grows several million times, as a result of which they burst, and the washing liquid acquires the necessary energy for deep cleaning of inventory from solid contaminants.The ultrasonic bath is made of high quality stainless steel to resist rust and wear. Thanks to the transparent lid, which prevents splashing of liquid, you can observe the cleaning process. Internal lighting will facilitate the inspection of the contents of the bath. The timer in this bath is fixed at 3 minutes. The kit comes with two types of coasters for parts immersed in the bath.
Specifications of Ultrasonic Cleaner CD-2800 Ultrasonic
- Ultrasonic frequency: 42 kHz, 42000 Hz
- Material: SUS304 stainless steel
- Volume: 600ml (maximum volume 500ml)
- Timer: 3 min
- Power supply: AC 220 - 240V, 50/60Hz
- Power: 50W (220V)
- Dimensions: 200 x 150 x 138mm
- Reservoir: 153 x 94 x 49mm
- Net weight: 0.78 kg
- Gross weight: 1.02 kg
- Manufacturer: Codyson
< /span>
If desired, you can use an ultrasonic cleaner carry out pre-sterilization cleaning. Disinfectants can be poured inside the sink WITHOUT CHLORINE such as Surfanios, Aniozyme, Blanidas enzyme, Blanidas active, Lysoformin. At the same time, strictly follow the instructions of the disinfectant manufacturer!
Sequence of using ultrasonic nail cleaner:
- Place the item to be cleaned on the plastic tray,
- Pour water into the purifier bath. The water level should be between the "MAX" - "MIN" marks.
- Place the tray in the tub. The objects to be cleaned must not come into contact with each other and with the walls of the steel bath.
- Press the 'ON' button, the cleaner starts working.
- Typically mode 180 sec . sometimes enough.
- Watch the degree of water pollution.
- If heavily soiled, replace the water and repeat the procedure in short mode.
Ultrasonic cleaner Codyson CD-2800 0.6L
Features Ultrasonic cleaner Codyson CD-2800
< /span>- Appearance: Ste sterilizers
- Sterilizer type : Ultrasonic
- Timer : Yes
- Destination : Universal
- Country -product manufacturer: China
- Ultrasonic washer (bath) performs ultrasonic cleaning of hand instruments before the sterilization procedure, in particular instruments that have holes, indentations or rotating joints (scissors, cutters, forceps, nippers, etc.), nail files, nozzles for milling cutters, burs, milling cutters, tattoo needles zha, but only metal products.
SonicinAnna (sinks) are used in beauty salons, hairdressers, massage parlors, tattoo parlors and at home.
An ultrasonic cleaner cleans instruments by vibrating the liquid while using ultrasonic waves, which allows you to clean tools even in the most inaccessible places.
Model benefits:
- high quality cleanup,
- waterproof insulated case,
- quick cleanup - only 3 minutes,
- original design,
- compact size,
- the presence of two loaded parts,
- transparent lid and inner light,
- fixed timer for 3 minutes,
- made of high quality stainless steel.
- 12 months warranty
- Certificate
Sonic Wave CD-2800 Ultrasonic Cleaner, 1.3 Pint/0.6 L, 220V, White
- Ultrasonic Cleaner, 1.3Pt/0.6L, white color, 220V
Stainless Steel Tank, Tank Size (oval) 6.1'x3.7'x2.0' Ultrasonic Frequency 42,000 Hz< /li>3-minute auto shutoff< span style='font-size: 18px,'>Accessories included: plastic basket, watch stand- Ultrasonic Cleaner. Timer: 3-minute auto shut-off.
- Stainless steel tank capacity: 600 ml/1.3 pint
- Gross unit weight: 2.4 lb.Warranty 1 year.
- Certification:
- < span style='font-size: 18px,'>CE, EMC, ETL, GS, RoHS, SAA,GS,PSE,CETL,REACH
- Capacity:
- 600
- Power (W):
- < span style='font-size: 18px,'>50
- < span title='Voltage (V)' style='font-size: 18px,'>Voltage (V):
- 220
- Model Number:
- CD-2800
- Brand Name:
- CODY,CODYSON
- Place of Origin:
- China
- Color:
- White silver pink blue
- Material:
- ABS
- Tank material:
- Stainless steel SUS304
- Power:< /span>
- 50W
- Voltage:
- 220-240V
- < span title='Frequency' style='font-size: 18px,'>Frequency:
- 42000Hz< /dd>
- Use:
- Home eyewear shop< span style='font-size: 18px,'>
- Warranty :
- 12 months
