Carbide cutters for manicure and pedicure are made from hard alloys containing tungsten and other elements. Diamond grinding is used to form and sharpen the cutting edge. Such cutters for manicure are durable, productive, they heat up much less during operation.
Unlike all other nozzles, such nozzles cut the material, forming chips, not dust. They are very well suited for preliminary, rough processing of both hard and softer, porous materials. For the upper keratinized layer of the feet and corns, cutters with a very rough notch are used. They work like small blades, gently cutting away only dead skin without damaging live skin.
These burrs are ideal for thinning gel and acrylic for corrections and removing artificial nails.
For gel, you must use cutters with larger notches, because viscous gel gets stuck between the teeth and clogs the tool.
Metal carbide tips work quickly, do not cause heat, almost do not form dust.
CHARACTERISTICS
- Shank Diameter: 2.35mm
- Shape: Cylinder Round
- Color: Violet
- Abrasion: Coarse
- Recommended speed: 15,000 - 30,000 rpm
PURPOSE
- Corn treatment;
- Removing gel polish from artificial nails.
- Smoothing thickening of the nail plate
- Treatment of cracks
Caring for carbide cutters
- Immediately after work, place the nozzle in a disinfectant solution, soak it in the solution for the required time. After that, the nozzle must be rinsed under running cold water.
- After disinfection, place the carbide nozzle in an ultrasonic cleaner, all contamination will be removed from the cutter by cavitation.
- The nozzles after processing must be stored in special lockable stand for cutters.
- Disinfect, clean and sterilize the tips after each use and each client.
