Carbide cutters for manicure and pedicure are made from hard alloys containing tungsten and other elements. Diamond grinding is used to form and sharpen the cutting edge. Such cutters for manicure are durable, productive, heat up much less during operation.
This cutter with a transverse notch carefully removes the coating from the nails.
Unlike all other nozzles, carbide cuts the material, forming shavings, not dust. Most often, TVS burs are used to remove the upper keratinized layer of heels and corns. They are also ideal for thinning gel and acrylic when correcting or removing artificial nails.
SPECIFICATIONS
- Shank diameter: 2.35mm< br>
- Shape: Round cylinder
- Colour: green
- Abrasion: coarse
- Recommended speed: 15,000 - 30,000 rpm /min
PURPOSE
- Gel polish removal;
- Corn treatment;
- Treatment of the foot;
- Treatment of corns
Care for carbide cutters
- Immediately after place the nozzle in a disinfectant solution, soak it in the solution for the required time. After that, the nozzle must be rinsed under running cold water.
- After disinfection, place the carbide nozzle in an ultrasonic cleaner, all contamination will be removed from the cutter by cavitation.
- The nozzles after processing must be stored in special lockable stand for cutters.
- Disinfect, clean and sterilize the nozzles after each use and each client.
Color marking of designations for the degree of processing of TVS cutters
- Yellow - super fine;
- Red - fine;
- Blue - medium;
- Green - coarse;
- Black is super rough.
