Compressor for working with an airbrush. Piston, oil-free, with one cylinder and a receiver that stabilizes the working pressure and forms a reserve of air that removes possible pulsation. The most popular from the presented line. It can be used for large volumes of work and areas.
A reducer with a moisture separator is installed at the output of this compressor, which allows you to regulate the pressure of the air supplied to the airbrush, as well as clean it of moisture, which is extremely undesirable during operation. The compressor is also equipped with a so-called 'pressostat' (automatic pressure regulator), which turns the compressor on/off depending on air consumption. pressure in the receiver.
The low noise level allows you to use the compressor both at home and in other places where relative silence is required. The operating volume of this model is comparable to the operating level of a household refrigerator.
The piston system does not use any lubricating materials, which greatly simplifies its maintenance and extends its service life.
The kit includes a reducer, a filter and an air hose for an airbrush with fabric braid (7.5 mm * 4.5 mm, length 1.8 m, outlets with internal thread 1/8' x 1/8').
Compressor operating modes:
< p>Automatic pressure adjustment:
- Lower limit 3 bar
- Upper limit 4 bar
Manual adjustment of outlet pressure:
- Lower limit 0 bar
- Upper limit 4 bar
Compressor characteristics:
- Voltage, 220 -240 Volts
- Frequency, 50 Hertz
- Power, 150 Watts
- Maximum pressure, 4 bar
- Productivity, 23 l/min .
- Receiver capacity, 3 l.
- Weight, 5.2 kg
