Truncated corundum cone nozzle
These manicure cutters are made of synthetic material - corundum. Corundum nozzles have a relatively soft abrasive surface that retains its qualities even when erased. Due to this, corundum burs for manicure are not able to injure the skin or natural nails, therefore they are suitable for working with the most delicate areas. We recommend that beginners buy corundum cutters for hardware manicure, because with such nozzles it is much easier to develop skills without risk for the client.
Corundum cutters for hardware manicure and pedicure are used for finishing the skin, after using carbide, ceramic or diamond burs.
Corundum burs are produced in a wide range, their shape and size can be very different, as well as the purpose. They are used to treat the cuticle, the surface of the nail and the free edge of the nail, rough skin, nail fold, nail plate, interdigital spaces, correction of artificial nails.
Characteristics
- Head diameter: 4 .5mm
- Head height: 11mm
- Shank length: 50mm
- Shank diameter: 2.35mm
- Shape: truncated cone
- Shape code: B11
- Producer country: Ukraine
Destination
- Treatment of the surface of the nail
- Skin polishing
Caring for corundum cutters
- Immediately after work, place the nozzle in a disinfectant solution, soak it in the solution as necessary time. After that, the nozzle must be washed under running cold water.
- After disinfection, place the corundum nozzle in an ultrasonic cleaner, all impurities will be removed from the cutter by cavitation.
- The nozzles after processing must be stored special lockable stand for cutters.
- Disinfect, clean and sterilize the tips after each use and each client.
Abrasivity of corundum cutters
- Yellow - softest;
- Pink - softest;
- Blue - medium;
- White - roughest;
- Black - most roughest .
Every master always has corundum cutters.
These are delicate grinders and polishers.
This form of nozzle (blunt cone) is used to cleanse the pterygium (a thin film adjacent tightly to the nail), lift the cuticle, and a cutter in this form can be used as a buff.
The cut is unlikely , as it does not have a convexity like, for example, a flame cutter.
The material of the head is synthetic corundum (crystalline aluminum oxide), a strong and durable material.
The abrasiveness is quite soft, but even with long use, the cutter retains its qualities for a long time.
Corundum cutters are designed for delicate work, so they are often used by novice craftsmen. Such nozzles are not capable of causing any injury to the skin or nail.
After each use, the tool must be disinfected and sterilized.
First, the cutter is cleaned with a brush from dust and skin and placed in a solution for disinfection, then washed in running water and, at the last stage, placed in a sterilizer.
More convenient storage of cutters in a special organizer for such nozzles.
