Caps for pedicure: 

Caps-attachments abrasive sandpaper on plastic are used for treating the skin of the feet

For the treatment of calluses, cracks and roughness, sandpapers are excellent. They are used for both manicure and pedicure. Sanders for the milling machine are quite convenient to use.

Caps are attached to a rubber base or a special nozzle-a base that has special notches that allow you to fix the cap. Replacement caps are selected according to the size and abrasive. 

 MAIN ADVANTAGES:

• dead skin cells are removed more quickly and carefully,
• the minimum force applied is sufficient to achieve the expected effect,
• less traumatic – do not harm the healthy dermis,
• there is no effect of sticking of removed skin particles on the sand cap for pedicure, which makes it easier to work with the nozzle,
• the tips fit snugly to the holders – there is no risk that they will 'fly off' during use, while they are easily removed and replaced.
• In the process, this type of nozzle changes color to warn of the danger of overheating. This technology assumes 2 levels of warning about the threat of overheating of the skin, as a result of which the specialist will be able to immediately react, reducing the pressure ortaking a short pause in work. Thanks to this, there is no discomfort during processing, no itching and pain. The risk of burns is minimized in case of overheating of the dermis.
• the perfectly cylindrical shape of the cap reduces vibration
• the customer feels a more gentle touch of the cap

 The stop processing procedure lookslike this:

• the dead skin should be removed using a pedicure cap with a grain size ranging from 60 to 80, while such a part should be of a large diameter,
• next, you need to sand the feet, heels and fingers with a product that has an average grain – 150,
• at the final stage, the tip with the smallest grain – 320 is used.

Sandpaper cap for hardware manicure.

Ceramic nozzles (so-called artificial pumice) are made from ceramic crumbs mixed with an adhesive material. This mixture is filled into the mold and baked in the oven. The finished ceramic billet is connected to the tip, which is inserted into the milling cutter.

Depending on the size of the stone chips, ceramic nozzles differ in abrasiveness: small, medium, and large. As a rule, ceramic nozzles are used for pedicures.

With their help, you can perform basic work in a pedicure, as well as remove calluses, sand roughened skin on the feet, treat cracks, corns, shape the nail roller, etc.

Sand cutters for manicure are made on the same principle as sandpaper. They are also called caps, since their use provides a base on a metal rod with a rubber base.

These manicure cutters are referred to as sanding cutters and are used primarily for roughening areas of skin on the hands and feet.

Sand caps are a disposable tool and must be disposed of after use.

At the same time, the foot treatment procedure should take place on dry skin, in contact with water, the abrasive coating falls off.

Appointment

• Foot treatment
• Processing of the inter-finger space
• Treatment of corns
• Treatment of cracks
• Foot sanding

Hardness (abrasiveness) of sand caps:

• 60 Grit – a high degree of abrasiveness. They are used to remove a thick layer of dead skin and get rid of cracks.
• 80 Grit – high abrasiveness. They help to get rid of corns and calluses.
• 150 Grit – average abrasiveness. They are used to treat the not too roughened surface of the feet, as well as the pads of the fingers.
• 208 or 320 Grit – minimum abrasiveness. They are needed to finally Polish the dermis and nail plate.

Sand grinding cap (d=10mm), different abrasives are used for:

• removing the main layer of the nail plate (stitching) – up to 80 grit,
• sanding — up to 150 grit.,
• final polishing — up to 320 grit

SPECIFICATIONS

• The nozzle diameter is 10 mm
• Working part length-13mm
• Shape-rounded cylinder