Single-cylinder compressor with receiver and forced cooling UAirbrush TC-18TF
UAirbrush TC-18TF is a single–cylinder oil-free compressor for airbrushing characterized by its quiet operation. The compressor provides a self–stop system when the system has 4 bars and an auto-start when the pressure drops to 3 bar. A gearbox with a pressure gauge is installed at the outlet of the compressor, so you can adjust the pressure required for operation. In addition, a dehumidifier filter is installed to eliminate the possibility of moisture entering the airbrush, and therefore to work. Due to the presence of a 3-liter receiver, the air line will be stable, smooth, without any pulsations. A forced cooling system is installed on the compressor, which will ensure a longer service life of the equipment. The compressor performs well when working with airbrushes with any tank arrangement (upper, lower, side) and nozzle diameters from 0.15 to 0.8 mm.
This model has a capacity of 23-25 liters per minute. A distinctive feature of the model will be a very low noise level. It is suitable for working at home. It is used in the following areas of airbrushing: modeling, airbrushing on canvas, interior work, restoration work, confectionery art, body art, etc.
Compressor Characteristics:
Type: single cylinder, oil-free
Forced cooling: yes
Capacity: 23-25 l/min
Maximum pressure: 4 bar
Auto start/hitchhiking function: 3/4 bar
Voltage: 220-240 V
Frequency: 50 Hz
Removable dehumidifier filter assembly with gearbox and pressure gauge: 1 pc
Possibility of manual adjustment at the outlet: 0-4 bar
Receiver: 3 L
The presence of an emergency air outlet valve: yes
Output with external thread: 1/8"
Hose: not included
Weight: 5 kg
Box dimensions: 68x32.5x34.5 cm
Model: TC-18TF
Brand: UAirbrush
Country of manufacture: China
Operate the compressor in a dry, clean, well-ventilated place. Follow the recommendations when working with the compressor (20-30 minutes of continuous operation, 15 minutes of break).
For ease of use, you can also complete the compressor with a hose, a quick-release connection or adapters, if a non-standard outlet is installed on the airbrush.
