Buy Ultrasonic sterilizer CD-4810 Sink Ultrasonic Cleaner 2000ml, for manicure rooms, beauty salons, hairdressers, cosmetology centers whosale and retail

Ultrasonic cleaner for manicure instruments Ultrasonic Cleaner CD-4810

Ultrasonic cleaning is a special device for sterilizing various tools: manicure tools, nozzles for a milling cutter, and more. Ultrasound penetrates deep even into the most hard-to-reach contaminated places of instruments, cleaning them well. The ultrasonic cleaning bath combines 2 stages of instrument preparation: cleaning and pre-sterilization treatment. This will help reduce the processing time of instruments in the sterilizer, as well as make the cleaning procedure better, unlike manual cleaning. mojka-codyson.jpg" style="width: 50%;">

The principle of the ultrasonic bath is to create the effect of cavitation - ultra-fast formation and destruction of millions of small bubbles in a liquid medium. This is due to the alternation of low and high pressure waves generated by ultrasound. The size of microscopic bubbles with increasing pressure grows several million times, as a result of which they burst, and the washing liquid acquires the necessary energy for deep cleaning of inventory from solid contaminants.

The ultrasonic bath is made of high-quality stainless steel, which prevents the formation of rust and wear. Thanks to the transparent lid, which prevents splashing of liquid, you can observe the cleaning process. Internal lighting will facilitate the inspection of the contents of the bath. The timer in this bath is continuously adjustable from 1 to 30 minutes. The kit includes two types of stands for parts immersed in the bath.

Ultrasonic sterilizer for manicure instruments Ultrasonic Cleaner CD-4810 used for cleaning:

• Various kinds of electronic components and printed circuit boards.
• Glasses and their parts.
• Jewellery, diamonds, watch chains, keys, etc.
• Stationery: feather handles, brush handles, etc.
• Medical supplies.
• Manicure tools and router bits

Washing specifications Ultrasonic Cleaner CD-4810 ultrasonic

• Power supply: 220~240V (AC), 50Hz
• Power consumption: 160W
• Ultrasonic frequency: 35 kHz
• Display: LED
• Temperature adjustment: there are 5 heating modes eva liquid
• Reservoir volume: 2000ml (maximum liquid level 1700ml)
• Timer: infinitely adjustable from 1 to 30 minutes
• Reservoir material: stainless steel
• Tank dimensions: 150 x 130 x 50mm
• Dimensions: 200 x 175 x 145mm
• Weight: 2.2 kg
• Manufacturer: Codyson

If desired, pre-sterilization cleaning can be carried out using an ultrasonic cleaner. Inside the sink, you can pour disinfectants WITHOUT CHLORINE such as Surfanios, Aniozyme, Blanidas enzyme, Blanidas active, Lysoformin. At the same time, strictly follow the instructions of the manufacturer of the disinfectant!

The sequence of application ultrasonic cleaner for manicure:

1. Place the object to be cleaned on plastic drip tray,
2. Pour water into the cleaner bath. The water level should be between the "MAX" - "MIN" marks.
3. Place the drip tray in the tub. The objects to be cleaned must not come into contact with each other and with the walls of the steel bath.
4. Press the "ON" button, the cleaner starts working.

• Usually mode 180 sec. is enough.
• Watch the degree of contamination of the water.
• In case of severe contamination, change the water and repeat the procedure in a short mode.