Ultrasonic cleaner for manicure instruments Ultrasonic Cleaner CD-4801
An ultrasonic cleaner is a special device for sterilizing various instruments: manicure instruments, nozzles for a milling cutter and other. Ultrasound penetrates deep even into the most hard-to-reach contaminated places of instruments, cleaning them well. The ultrasonic cleaning bath combines 2 stages of instrument preparation: cleaning and pre-sterilization treatment. This will help reduce the processing time of instruments in the sterilizer, as well as make the cleaning procedure better, unlike manual cleaning. style="width: 50%;">
The principle of the ultrasonic bath is to create the effect of cavitation - ultra-fast formation and destruction of millions of small bubbles in a liquid medium. This is due to the alternation of low and high pressure waves generated by ultrasound. The size of microscopic bubbles with increasing pressure grows several million times, as a result of which they burst, and the washing liquid acquires the necessary energy for deep cleaning of inventory from solid contaminants.
The ultrasonic bath is made of high-quality stainless steel, which prevents the formation of rust and wear. Thanks to the transparent lid, which prevents splashing of liquid, you can observe the cleaning process. Internal lighting will facilitate the inspection of the contents of the bath. The timer in this bath has 5 modes. The set includes two types of stands for parts immersed in the bath.
Ultrasonic Cleaner CD-4801 is used for cleaning:
< li>Various kinds of electronic components and circuit boards. - Glasses and their parts.
- Jewellery, diamonds, watch chains, keys, etc.
- Stationery: fountain pens, brush pens, etc.
- Medical supplies.
- Manicure tools and router bits
< strong>Specifications of Ultrasonic Cleaner CD-4801 ultrasonic
- Power supply: AC220 - 240V~ 50Hz
- Power: 60V
- Dimensions: 24.3x16.4x22.8 cm
- Container volume: 1400 ml
- Timer settings: 90s - 180s - 280s - 380s - 480 c
- Frequency: 42 kHz
- Weight: 1.75 kg
- Manufacturer: Codyson
- Powerful ultrasonic sensor with cleaning effect.
- Control panel with recognition technology. Stable, reliable, waterproof
- Digital timer, 5 time settings
- Industrial temperature sensor, waterproof board, cooling fan, increased device durability
- Wall thickness 4 mm ensures moisture resistance.
- Removable power cable, convenient to use, numerous safety certificates.
Sequence of application ultrasonic cleaner for manicure:
- Place the item to be cleaned on the plastic tray,
- Pour water into the cleaner bath. The water level should be between the "MAX" - "MIN" marks.
- Place the drip tray in the tub. The objects to be cleaned must not come into contact with each other and with the walls of the steel bath.
- Press the "ON" button, the cleaner starts working.
- Usually mode 180 sec. is enough.
- Watch the degree of contamination of the water.
- In case of severe contamination, change the water and repeat the procedure in a short mode.
