Buy Diaphragm pump 5L/min, with power supply unit 12V 60 watt, 0.8 MPa, thread 1/2, for the capacity for osmosis to Tumen, self-priming wholesale and retail in ubeauty.pro store

Features:
1. The diaphragm pump combines the advantages of a self-priming pump and a chemical pump. Installed in a dry, well ventilated place, the pump cannot operate in water.
2. Using a variety of imported corrosion-resistant materials, self-priming, thermal protection, smooth operation, long continuous idling time, long continuous load.
3. Fully sealed, high stable pressure.
4. The rubber bracket can absorb vibration from the pump during operation.
5. When the water pressure is too high, the pump will protect itself.
6. Pressure protection: pressure switch protection.
7. Maximum flow 5-6 l/min, maximum pressure 7.0 kg.
8. Work: continuous service (continuous work under different working pressure at different times)
9. Use of media: water or solvent PH 5-8, oil. Service life: more than 500-1000 hours of continuous work.
10. Pressure switch characteristics: when the water is turned off, it will automatically cut off the power, the motor will be stopped. After turning on the water, it will turn on automatically, the motor will work.
11. The case is made of ABS plastic.
12. The maximum pressure is factory set and the maximum pressure cannot be adjusted during use.

Specifications:
Volts: 12VDC,
(PS: 220VAC (power supply included)
A: 6A
Rated power: 72W
Pressure: 7kg
Bandwidth: 6L/min (6.0 liters per minute)
Working surface: no oil, no strong corrosive effect, no acid and alkali, no liquid solids,
Operating temperature: 0 ? -100 ?
Input size in and out: 10 mm 1/2 inch
Dimensions: 16.5 × 10 × 6.2 cm >Type: thread, straight
Weight: 598g (straight),582 (thread)



< /br>






















-Note!Each of our products ov can be tested with water before shipping to make sure it works, so the pump can be with moisture (water) don't worry, it's been tested before shipping