Buy Dry-burning cabinet Microstop M3, for sterilization of medical, manicure tools, for beauty salons, dry-burning for sterilization wholesale and retail in ubeauty.pro store

To sterilize medical and manicure instruments every beauty salon or medical laboratory should have at least a small, but still dry-heat cabinet. This equipment sterilizes metal and glass instruments using hot, dry air, providing high-quality, gentle sterilization. This removes some types of dirt, as well as all microbes and viruses that may have appeared on the instrument after the procedure. In fact, it is for this master that they sterilize instruments.

It should be noted that hot air sterilization is the gentlest way to sterilize metal instruments. Because of this, they do not become dull and do not lose their original luster, so they will look like new for a long time.

The domestic company Microstop has produced quite a lot of dry heat ovens (also called dry heat and air sterilizers). One of the oldest models is the Microstop M3 dry heat, which, due to its large capacity, will be an excellent option for use in large Beauty-schools and beauty salons, including manicure shops.

The volume of the sterilization chamber is 5 & nbsp; liters. This is enough to fit 6 tool sets without kraft bags and 3 tool sets in kraft bags.

The dry heat power is 200 W. At the same time, it provides three sterilization modes at once:

• at 80 ° C for 30 minutes (drying mode),

• at 160°C for 150 minutes,

• at 180°C for 60 minutes,

• at 200 °C for 30 minutes.

For convenience, dry heat has built-in two displays: one displays the selected time, and on  the other is the selected temperature. The heating time to set temperature varies from 10 to 15 minutes.

All Microstop ovens are equipped with a protective electronic system, including model M3: maximum value (that is, above 200 ° C), the dry heat is automatically turned off. It will be possible to turn it on again after a while, when it cools down a bit.

This model is certified by UkrSEPRO, and means it has been tested for compliance with the quality standard. In addition, an inspection was carried out by the Ministry of Health of Ukraine for compliance with all norms and standards of sterilization and for compliance with temperature regimes. That is why we can say with confidence that this equipment is safe and reliable for use in beauty salons and medical laboratories.

The sterilization chamber is made of  heat-resistant, stainless steel, so it is wear-resistant even despite  such high temperature conditions.

But, in general, it can be said that not only the camera is wear-resistant - the whole dry heat as a whole can boast of reliability and wear resistance, and details durability. After all, the average service life of Microstop M3 is 50,000 hours of continuous operation, and this is clearly more than 3-4 years.